Typhoon HIL Software Manual
- Introduction
  Overview of the categories covered in the Typhoon HIL Software Manual
- System Requirements
  Guidelines for the hardware and/or software environment necessary to run Typhoon HIL Control Center, for both PC and Test Server/Virtual Machine-based setups.
- Typhoon HIL Quick Start Guide
- Typhoon HIL Toolboxes
  List of the Toolbox Packages available in the Typhoon HIL software suite
- Connecting to your HIL device
  Guidelines on how to connect to a HIL device using either USB or Ethernet ports.
- Device Manager
  Device Manager is used to create, manipulate, and activate HIL device setups.
- Typhoon HIL Control Center
  This section provides a general description of Typhoon HIL Control Center and lists the main software components accessible from it, as well as additional software tools which can be invoked from its interface.
- Example Explorer
  General Description of the Typhoon HIL Control Center Example Explorer.
- Signal Access Management
  This feature allows you to change the visibility of signals in Schematic Editor and HIL SCADA
- Schematic Editor
  Introduction to the Schematic Editor tool in Typhoon HIL Control Center
- Schematic Editor Component Libraries
  Detailed functionality and use of the pre-built Component Libraries in Schematic Editor
- Third-party integrations
  This section provides an overview of the key third party integrations within Typhoon HIL's toolchain.
- HIL SCADA
  Description of the HIL SCADA tool in Typhoon HIL Control Center
  - Command Toolbar
    Description of the Command Toolbar in HIL SCADA
  - Library Explorer Dock
    This section describes library dock
  - Panel Explorer Dock
    This section describes panel explorer dock
  - Model Explorer
    This section describes the HIL SCADA Model Explorer.
  - Namespace Explorer
    This section describes Namespace Explorer
  - Model Settings Dock
    This section describes model settings dock
    - Model Controls
      This section describes model controls
      - Source settings
        This section describes the Source settings in HIL SCADA.
      - PV Panel settings
        This section describes PV Panel settings
      - Machine settings
        This section describes machine settings
      - Contactors settings
        This section describes contactors settings
      - Switching block settings
        This section describes switching block settings
      - Batteries settings
        This section describes batteries settings
      - SCADA Inputs settings
        This section describes SCADA Inputs settings
    - Output Controls
      Description of the Output Control settings in HIL SCADA
  - Panel Tabs
    This section describes panel tabs
  - Message Log Dock
    This section describes message log dock
  - History Dock
    This section describes history dock
  - Status Bar
    This section describes the status bar
  - HIL SCADA Widget Library
    This section provides an overview of Widget Library support in HIL SCADA.
  - HIL standalone boot configuration
    This section describes HIL standalone boot configuration
  - HIL SCADA Command-line Options
    This section describes options for starting HIL SCADA from command line
  - Standalone HIL SCADA
    This section briefly describes Standalone HIL SCADA tool
  - HIL SCADA External Mode
    Brief description of the External mode feature available in HIL SCADA
- Waveform Generator
  This section describes the waveform generator tool in Typhoon HIL Control Center.
- Test and Calibration Tool
  Description of the Test and Calibration tool in Typhoon HIL Control Center
- TyphoonTest IDE
  This section describes TyphoonTest IDE
- Signal Analyzer
  This section describes the Signal Analyzer tool.
- Lookup table extraction tool
  Description of the Typhoon HIL Control Center tool for extracting characteristics (lookup tables) from datasheet graphs and charts into a format that can be imported by non-linear models.
- Package Manager
  Description of the Typhoon HIL Control Center tool for creating and managing Typhoon packages that contain Schematic examples, Schematic and widget libraries, documentation etc.
- Usage Logging
  This section briefly describes Typhoon HIL software logging feature.
- Python Interpreters
  Overview of how you can use Typhoon HIL Python Interpreters to further customize your test files.

Batteries settings

This section describes batteries settings

You can set the Battery initial State of the Charge value. This value will be set at the beginning of each simulation. Changing this value during a simulation will not have any effect.