Hardware Manual Introduction
Collection of some of the guides on the deployment, use, and management of Typhoon HIL hardware devices.
Hardware Manual Introduction
Table 1 features a collection of some of the guides on the deployment, use, and management of Typhoon HIL hardware devices.
Note: Currently, not all hardware documentation is available for web access. If a guide you need is missing here, please
contact us.
Category | Description of Content |
---|---|
HIL 4/6 Series Hardware User Guide | This document provides information on Typhoon HIL simulator hardware. |
HIL Paralleling Guide | This document introduces the HIL paralleling concept, defines modeling of relevant link parameters, and explains how to properly connect multiple Typhoon HIL devices. |
Hardware Interfacing Guide | Tips and examples on how to connect any controller to the HIL. |
HIL dS Interface Type-B | Information about the HIL dS Interface Type-B, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators. |
HIL dS Interface Type-C | Information about the HIL dS Interface Type-C, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators. |
HIL Breakout Board | Information about the HIL Breakout Board, a passive breakout board which provides easy access to individual HIL signals. |
Universal HIL Connect | Information about the Universal HIL Connect, a variant of the HIL Connect interface device, designed to adapt HIL IO signal levels to those most commonly used in the industry. |
HIL DSP 180 Interface | Information about the HIL DSP 180 Interface, an interface board which allows for connecting Texas Instruments Control Card boards to Typhoon HIL simulators. |
HIL TI Launchpad Interface | Information about the HIL TI Launchpad Interface, an interface board which allows for connecting TI's LaunchPad™ boards to Typhoon HIL simulators. |
HIL TI uGrid Launchpad Interface | Information about the HIL TI uGrid Launchpad Interface, an interface board which allows for connecting up to three TI LaunchPad™ boards to Typhoon HIL simulators. |
HIL4/6 Calibration Card | Information about the HIL4 and HIL6 Calibration Card accessories designed for one-click calibration of all HIL4 and HIL6 series devices. |
HIL Infineon TriBoard Interface | Information about the HIL Infineon TriBoard Interface, an interface board which allows for connecting Infineon TriBoard evaluation boards to Typhoon HIL simulators. |
Disclaimers
“dSPACE” and “MicroLabBox” are registered trademarks of dSPACE GmbH in the United States of America or other countries, or both.
“Texas Instruments“, “TI“, and "LaunchPad™" are registered trademarks of Texas Instruments Incorporated in the United States of America, or other countries, or both.