Typhoon HIL Hardware Manual
- Hardware Manual Introduction
  Collection of some of the guides on the deployment, use, and management of Typhoon HIL hardware devices.
- HIL 4/6 Series Hardware User Guide
  This document provides information on Typhoon HIL simulator hardware.
- HIL Paralleling Guide
  This document introduces the HIL paralleling concept, defines modeling of relevant link parameters, and explains how to properly connect multiple Typhoon HIL devices.
- Hardware Interfacing Guide
  Tips and examples on how to connect any controller to the HIL.
- HIL dS Interface Type-B
  Information about the HIL dS Interface Type-B, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
- HIL dS Interface Type-C
  Information about the HIL dS Interface Type-C, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
  - Overview
    Overview of the purpose and connectivity of the HIL dS Interface Type-C
  - Layout
    General layout of the HIL dS Interface Type-C Board
  - Digital IO type selection
    Overview of the selection and operation of Digital IO switches
  - Pinouts
    Pinouts for all connectors found on the dS Interface Type-C
  - Mechanical
    Dimensions and mechanical guidelines for the HIL dS Interface Type-C
  - Scope of delivery
    Scope of delivery of the HIL dS Interface Type-C package
  - Revision History
    Update history of the HIL dS Interface Type-C documentation
- HIL Breakout Board
  Information about the HIL Breakout Board, a passive breakout board which provides easy access to individual HIL signals.
- HIL Connect
  Information about the HIL Connect, a 19" 6U interface device, designed to adapt HIL IO signal levels to those most commonly used in the industry.
- HIL DSP 180 Interface
  Information about the HIL DSP 180 Interface, an interface board which allows for connecting Texas Instruments Control Card boards to Typhoon HIL simulators.
- HIL TI Launchpad Interface
  Information about the HIL TI Launchpad Interface, an interface board which allows for connecting TI's LaunchPad™ boards to Typhoon HIL simulators.
- HIL TI uGrid Launchpad Interface
  Information about the HIL TI uGrid Launchpad Interface, an interface board which allows for connecting up to three TI LaunchPad™ boards to Typhoon HIL simulators.
- HIL4/6 Calibration Card
  Information about the HIL4 and HIL6 Calibration Card accessories designed for one-click calibration of all HIL4 and HIL6 series devices.
- HIL Infineon TriBoard Interface
  Information about the HIL Infineon TriBoard Interface, an interface board which allows for connecting Infineon TriBoard evaluation boards to Typhoon HIL simulators.

HIL dS Interface Type-C

Information about the HIL dS Interface Type-C, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.

Table 1. HIL dS Interface Type-C Table of Contents
Chapter	Description of Content
Overview	Overview of the purpose and connectivity of the HIL dS Interface Type-C
Layout	General layout of the HIL dS Interface Type-C Board
Digital IO type selection	Overview of the selection and operation of Digital IO switches
Pinouts	Pinouts for all connectors found on the dS Interface Type-C
Mechanical	Dimensions and mechanical guidelines for the HIL dS Interface Type-C
Scope of delivery	Scope of delivery of the HIL dS Interface Type-C package
Revision History	Update history of the HIL dS Interface Type-C documentation

“dSPACE” and “MicroLabBox” are registered trademarks of dSPACE GmbH in the United States of America or other countries, or both.