Home
Typhoon HIL Hardware Manual
HIL dS Interface Type-C
Information about the HIL dS Interface Type-C, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
Layout
General layout of the HIL dS Interface Type-C Board

Typhoon HIL Hardware Manual
- Hardware Manual Introduction
  Collection of some of the guides on the deployment, use, and management of Typhoon HIL hardware devices.
- HIL101 Hardware User Guide
  Official documentation of the HIL101 simulator hardware device.
- HIL402 Hardware User Guide
  Official documentation of the HIL402 simulator hardware device.
- HIL404 Hardware User Guide
  Official documentation of the HIL404 simulator hardware device.
- HIL506 Hardware User Guide
  Official documentation of the HIL506 simulator hardware device.
- HIL602+ Hardware User Guide
  Official documentation of the HIL602+ simulator hardware device.
- HIL604 Hardware User Guide
  Official documentation of the HIL604 simulator hardware device.
- HIL606 Hardware User Guide
  Official documentation of the HIL606 simulator hardware device.
- HIL Paralleling Guide
  This document introduces the HIL paralleling concept, defines modeling of relevant link parameters, and explains how to properly connect multiple Typhoon HIL devices.
- Hardware Interfacing Guide
  Tips and examples on how to connect any controller to the HIL.
- HIL dS Interface Type-A
  Information about the HIL dS Interface Type-A, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
- HIL dS Interface Type-B
  Information about the HIL dS Interface Type-B, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
- HIL dS Interface Type-C
  Information about the HIL dS Interface Type-C, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
  - Overview
    Overview of the purpose and connectivity of the HIL dS Interface Type-C
  - Layout
    General layout of the HIL dS Interface Type-C Board
  - Digital IO type selection
    Overview of the selection and operation of Digital IO switches
  - Pinouts
    Pinouts for all connectors found on the dS Interface Type-C
  - Mechanical
    Dimensions and mechanical guidelines for the HIL dS Interface Type-C
  - Scope of delivery
    Scope of delivery of the HIL dS Interface Type-C package
- HIL Breakout Board
  Information about the HIL Breakout Board, a passive breakout board which provides easy access to individual HIL signals.
- HIL Connect
  Information about the HIL Connect, a 19" 6U interface device, designed to adapt HIL IO signal levels to those most commonly used in the industry.
- HIL DSP 180 Interface
  Information about the HIL DSP 180 Interface, an interface board which allows for connecting Texas Instruments Control Card boards to Typhoon HIL simulators.
- HIL TI Launchpad Interface
  Information about the HIL TI Launchpad Interface, an interface board which allows for connecting TI's LaunchPad™ boards to Typhoon HIL simulators.
- HIL TI uGrid Launchpad Interface
  Information about the HIL TI uGrid Launchpad Interface, an interface board which allows for connecting up to three TI LaunchPad™ boards to Typhoon HIL simulators.
- HIL4/6 Calibration Card
  Information about the HIL4 and HIL6 Calibration Card accessories designed for one-click calibration of all HIL4 and HIL6 series devices.
- HIL Infineon TriBoard Interface
  Information about the HIL Infineon TriBoard Interface, an interface board which allows for connecting Infineon TriBoard evaluation boards to Typhoon HIL simulators.
- HIL CCS Interface
  Information about the HIL CCS Interface, a dedicated module for testing smart charge communication of electric vehicles and electric vehicle supply equipment.

Layout

General layout of the HIL dS Interface Type-C Board

The board features the following key sections, as shown in Figure 1.

HIL Analog connector
HIL Digital connector
16 BNC connectors, for 16 HIL analog inputs
16 BNC connectors, for 16 HIL analog outputs
dS GPIO type selector switch and indicator LEDs
CP17 DSUB37, for DS1104 digital I/O
CP18 DSUB37, for DS1104 PWM signals
CP19 and CP20, DSUB15, for DS1104 encoder interface connectors
P1A and P1B, for directly connecting to the DS1104

Figure 1. HIL dS Interface Type C layout