Mechanical

Dimensions and mechanical guidelines for the HIL dS Interface Type-C

The intended method of connection to the HIL dS Interface Type-C is via 32 BNC cables and one or more SUB-D cables, depending on the device.

To protect the HIL device from mechanical stress, the HIL dS Interface Type-C should be connected to the HIL via two 96-pin flat cables included in the package. Ideally, the board itself should be secured to the workbench via standoffs.

Dimensions of the HIL dS Interface Type-C are given in Figure 1.

Figure 1: HIL dS Interface Type-C dimensions