High Voltage card

Description of the High Voltage card for HIL Connect hardware

Note: For more information on how to configure your card in Typhoon HIL Control Center, please refer to the High Voltage Output Card parametrization documentation.

The High Voltage card provides 8 voltage outputs linked to 8 HIL AO channels. Specifically designed for voltage sensor emulation purposes, it utilizes linear technology to ensure low-noise operation and high accuracy.

High Voltage card revisions

Table 1. Card revisions
Code Revision Part number
JV 2.3 23272

High Voltage card hardware specification

Table 2. Hardware Specification
Parameter Value
Type Analog output
Number of channels 8
Input signal range ±10 V
Output signal range ±183.3 V
Output current ±1 mA
Bandwidth (-3dB) DC to 10kHz
Accuracy 1% + 10 mV
Isolation No

High Voltage card hardware settings

Table 3. Hardware Options
Option Method Possible options
Drive channel selection, in groups of 8 Via internal DIP switches Card driven from:

HIL AO1..8, or

HIL AO9..16, or

HIL AO17..24, or

HIL AO 25..32

High Voltage card connector data

Table 4. Connector data
Parameter Value
Connector outline
PCB connector part number 1155640000
Mating connector part number 1013490000

High Voltage card pinouts

Note: The following pinouts assume a AO1..8 hardware setting. If another setting is applied, this pinout also changes, e.g. AO9-15.
Table 5. Pinout - X1
Connector Pin Rating Related HIL channel
X1 1 ±183.3 V AO1
X1 2 - GND
X1 3 ±183.3 V AO2
X1 4 - GND
X1 5 ±183.3 V AO3
X1 6 - GND
X1 7 ±183.3 V AO4
X1 8 - GND
Table 6. Pinout - X2
Connector Pin Rating Related HIL channel
X2 1 ±183.3 V AO5
X2 2 - GND
X2 3 ±183.3 V AO6
X2 4 - GND
X2 5 ±183.3 V AO7
X2 6 - GND
X2 7 ±183.3 V AO8
X2 8 - GND