Typhoon HIL Hardware Manual
- Hardware Manual Introduction
  Collection of some of the guides on the deployment, use, and management of Typhoon HIL hardware devices.
- HIL 4/6 Series Hardware User Guide
  This document provides information on Typhoon HIL simulator hardware.
- HIL Paralleling Guide
  This document introduces the HIL paralleling concept, defines modeling of relevant link parameters, and explains how to properly connect multiple Typhoon HIL devices.
- Hardware Interfacing Guide
  Tips and examples on how to connect any controller to the HIL.
- HIL dS Interface Type-B
  Information about the HIL dS Interface Type-B, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
- HIL dS Interface Type-C
  Information about the HIL dS Interface Type-C, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
- HIL Breakout Board
  Information about the HIL Breakout Board, a passive breakout board which provides easy access to individual HIL signals.
- HIL Connect
  Information about the HIL Connect, a 19" 6U interface device, designed to adapt HIL IO signal levels to those most commonly used in the industry.
  - Overview
    Overview of the purpose of the HIL Connect.
  - Detailed description
    Detailed description of the functionality of the HIL Connect.
  - HIL Connect chassis
    Description of the HIL Connect chassis.
  - HIL Connect card overview
    Definition of available HIL Connect cards.
  - Common HIL Connect configurations
    Description of common HIL Connect card configurations.
  - Mechanical
    Mechanical dimensions of the HIL Connect.
  - Scope of delivery
    Scope of delivery of the HIL Connect package.
  - Revision History
    Update history of the HIL Connect documentation.
- HIL DSP 180 Interface
  Information about the HIL DSP 180 Interface, an interface board which allows for connecting Texas Instruments Control Card boards to Typhoon HIL simulators.
- HIL TI Launchpad Interface
  Information about the HIL TI Launchpad Interface, an interface board which allows for connecting TI's LaunchPad™ boards to Typhoon HIL simulators.
- HIL TI uGrid Launchpad Interface
  Information about the HIL TI uGrid Launchpad Interface, an interface board which allows for connecting up to three TI LaunchPad™ boards to Typhoon HIL simulators.
- HIL4/6 Calibration Card
  Information about the HIL4 and HIL6 Calibration Card accessories designed for one-click calibration of all HIL4 and HIL6 series devices.
- HIL Infineon TriBoard Interface
  Information about the HIL Infineon TriBoard Interface, an interface board which allows for connecting Infineon TriBoard evaluation boards to Typhoon HIL simulators.

HIL Connect chassis

Description of the HIL Connect chassis.

The HIL Connect chassis serves as the fundamental building block of any HIL Connect system. Its front panel offers connectors for interfacing with one row of any HIL device. On the rear side, it offers access points for mains and CAN connections.

Via its passive backplane, the HIL Connect chassis can accommodate the following types of cards:

HIL signal conditioning (up to 32 x AO, 16 x AI, 32 x DO, 32 x DI)
CAN based cards (IO expansion, resistor emulation, etc)
PSU cards

Figure 1. HIL Connect chassis front panel