Home
Typhoon HIL Hardware Manual
HIL Interfaces
Collection of some of the guides on the deployment, use, and management of HIL Interfaces available from Typhoon HIL.
HIL Remote IO Interface
Information about the HIL Remote IO Interface, a device for IO expansion in HIL test setups.
HIL Remote IO Firmware Update
Firmware update guide for the HIL Remote IO Interface

Typhoon HIL Hardware Manual
- Hardware Manual Introduction
  Collection of some of the guides on the deployment, use, and management of Typhoon HIL hardware devices.
- Typhoon HIL simulator devices
  Overview of the currently supported Typhoon HIL simulator devices.
- HIL Connect
  Information about the HIL Connect, a 19" 6U interface device, designed to adapt HIL IO signal levels to those most commonly used in the industry.
- HIL Interfaces
  Collection of some of the guides on the deployment, use, and management of HIL Interfaces available from Typhoon HIL.
  - HIL dS Interface Type-A
    Information about the HIL dS Interface Type-A, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
  - HIL dS Interface Type-B
    Information about the HIL dS Interface Type-B, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
  - HIL dS Interface Type-C
    Information about the HIL dS Interface Type-C, an interface board which allows for connecting dSPACE hardware to Typhoon HIL simulators.
  - HIL Breakout Board
    Information about the HIL Breakout Board, a passive breakout board which provides easy access to individual HIL signals.
  - HIL Remote IO Interface
    Information about the HIL Remote IO Interface, a device for IO expansion in HIL test setups.
    - Safety Guidelines
      Overview of the safety guidelines for Typhoon HIL simulator hardware
    - Overview
      Overview of the purpose and connectivity of the HIL Remote IO Interface
    - Specification
      General specification of the HIL Remote IO Interface
    - Pinout
      Pinout tables for the HIL Remote IO Interface
    - Setup guidelines
      Setup guidelines for systems featuring the HIL Remote IO Interface
    - HIL Remote IO Firmware Update
      Firmware update guide for the HIL Remote IO Interface
    - Mechanical
      Dimensions and mechanical guidelines for the HIL Remote IO Interface
    - Scope of delivery
      Scope of delivery of the HIL Remote IO Interface.
  - HIL Power Link Interface
    Information about the HIL Power Link Interface designed for converting electrical signals to optical signals, and vice versa.
  - HIL DSP 180 Interface
    Information about the HIL DSP 180 Interface, an interface board which allows for connecting Texas Instruments Control Card boards to Typhoon HIL simulators.
  - HIL TI Launchpad Interface
    Information about the HIL TI Launchpad Interface, an interface board which allows for connecting TI's LaunchPad™ boards to Typhoon HIL simulators.
  - HIL TI uGrid Launchpad Interface
    Information about the HIL TI uGrid Launchpad Interface, an interface board which allows for connecting up to three TI LaunchPad™ boards to Typhoon HIL simulators.
  - HIL Infineon TriBoard Interface
    Information about the HIL Infineon TriBoard Interface, an interface board which allows for connecting Infineon TriBoard evaluation boards to Typhoon HIL simulators.
  - HIL Nucleo-64 Interface
    Information about the HIL Nucleo-64 Interface, an interface board which allows for seamlessly connecting STM Nucleo-64™ development kits to Typhoon HIL simulators.
  - HIL POF Interface Board
    Information about the HIL POF Interface Board, an interface board which allows for converting HIL voltage digital signals to Optical signals, and vice versa.
  - HIL CCS Interface
    Information about the HIL CCS Interface, a dedicated module for testing smart charge communication of electric vehicles and electric vehicle supply equipment.
  - HIL Electric Vehicle Charging Interface
    Information about the HIL Electric Vehicle Charging Interface solution, a dedicated module for testing and validating Electric Vehicle Supply Equipment (EVSE). This interface requires a connected power amplifier to function.
  - HIL Regatron Interface Device
    Information about the HIL Regatron Interface Device, an interface which allows for seamless communication between Regatron Power Source devices and Typhoon HIL simulators.
- HIL Accessories
  Collection of some of the guides on the deployment, use, and management of Typhoon HIL accessories.

HIL Remote IO Firmware Update

Firmware update guide for the HIL Remote IO Interface

To update the HIL Remote IO Interface:

Ensure that the HIL Remote IO is connected to the same network as the PC running the script.
Ensure that any existing HIL device is disconnected in THCC Device Manager.
Run the update script located in the THCC installation directory: <installation path>/bin/remote_io.cmd
Note: This script can be executed only on Windows.

Each HIL Remote IO uses a static IP address in the format 192.168.20.X, where X = (Device ID + 1).

Example: If the Device ID (back of the device) is 2, the IP address will be: 192.168.20.3.