Hello everyone,
I am experiencing a compilation issue with the Single Phase Inverter component on the Typhoon HIL606.
Whenever I select Digital Inputs per Leg as the converter control method, model validation passes, but hardware compilation fails with an internal exception. Interestingly, the same model compiles successfully using both Model Control and Digital Inputs per Switch.
The compilation error is:
File "typhoon\tools\compiler\pe_compiler\hw_entities.py",
line 2640, in __handle_fsm_ignore_switch
IndexError: list index out of range
I have tried several troubleshooting approaches without success.
Resolving this issue is particularly important for our planned Imperix B-Box–Typhoon HIL606 interface, as Digital Inputs per Leg would reduce the required external PWM signals from 48 to 24 for my simulation. This would significantly simplify the hardware connections.
Could you please advise whether this is a known software issue, a configuration limitation, or something that can be resolved through the inverter settings?
I would appreciate your technical assistance.
Regards
Ali