Linear passive components

This section describes linear passive components

The Passive Components sub-folder of the Schematic Editor core library includes a variety of passive components, including:
Table 1. Linear passive components in the Schematic Editor Core Library
component component dialog window component parameters

Resistor

  • Resistance (Ohms)

Inductor

  • Inductance (H)
  • Initial Current (A)

Capacitor

  • Capacitance (F)
  • Initial voltage (V)

Super capacitor

Figure 1. Schematic diagram of a super capacitor

  • Capacitance (F)
  • Initial Voltage (V)
  • Parasitic inductance (H)
  • Serial resistance (Ohms)
Note: Capacitance of the super capacitor must be greater than10mF.

Two coupled inductors

  • L1 inductance (H)
  • L1 initial current (A)
  • L2 inductance (H)
  • L2 initial current (A)
  • Coupling coefficient

Three coupled inductors

  • L1 inductance (H)
  • L1 initial current (A)
  • L2 inductance (H)
  • L2 initial current (A)
  • L3 inductance (H)
  • L3 initial current (A)
  • L1 - L2 coupling coefficient
  • L1 - L3 coupling coefficient
  • L2 - L3 coupling coefficient

Four coupled inductors

  • L1 inductance (H)
  • L1 initial current (A)
  • L2 inductance (H)
  • L2 initial current (A)
  • L3 inductance (H)
  • L3 initial current (A)
  • L4 inductance (H)
  • L4 initial current (A)
  • L1 - L2 coupling coefficient
  • L1 - L3 coupling coefficient
  • L1 - L4 coupling coefficient
  • L2 - L3 coupling coefficient
  • L2 - L4 coupling coefficient
  • L3 - L4 coupling coefficient